I messed with the previously assembled SKX031 again。

The change this time is that the windshield is an external plastic windshield for 1675/16750, about 1 mm below.

Shave and insert with sandpaper。The position of the re-crops does not match a little, but it is acceptable。

The first plastic windshield was too crimped and cracked、Waiting for the second arrival、I didn't apply varnish this time because the dial was also damaged by varnish, so I waited for the second arrival and continued to fail.。

Flash fit is boy genuine 22mm、Breath is 7s26-0500

I used genuine Jubilee 20mm。

The GMT needle is from yobokies、Because the round hole is big、Glued to the back of the hour hand。

Bondic (an instant adhesive that cures when exposed to ultraviolet rays) is used for adhesion.。

Attach the needle once、If you turn it to check the gap between the hands and the dial, it will come off and get caught in the minute hand.

Since it got caught, I removed it and expanded the range again and glued it。